How To Enable Auto Enter (after scan) for Honeywell Mobile Computers

Needing to set up auto enter after scanning a barcode on your Honeywell mobile computer? Our IT Specialist will show you step-by-step how to do so! If you have any questions, call us at 1.800.585.9030.

 

Step-by-Step Configuration Guide

1. Access the Settings Menu:

• Navigate to the App Drawer by swiping up from the home screen.
• Tap on the Settings icon (gear symbol).

2. Open Honeywell Settings:

• Scroll down and select Honeywell Settings.

3. Modify Data Processing Settings:

• Tap on Data Processing Settings.
• Select Wedge as keys value and add 13 to the existing values (e.g., 9, 10, 13), then tap OK.
• Tap on Suffix and input the hexadecimal value for a carriage return: \x0D, then tap OK.

These settings will be applied immediately, enabling the auto-enter function after each scan.

Applicable Honeywell Devices

The above instructions are applicable to the following Honeywell Android devices:

• CK65 Mobile Computer
• CT40 Handheld Mobile Computer
• CT60 Handheld Mobile Computer
• CN80 Handheld Mobile Computer
• Thor VM1A Vehicle-Mounted Computer
• Thor VM3A Vehicle-Mounted Computer

Troubleshooting Common Issues

If the auto-enter feature is not functioning as expected:

• Verify that the Wedge as keys value includes 13, which corresponds to the carriage return.
• Ensure the Suffix is correctly set to \x0D.
• Restart the device to apply the new settings effectively.

Additional Resources

For further assistance, refer to the official Honeywell support documentation:

• How to Add/Remove the Carriage Return (CR) After Each Scan